GB03 gallows brackets are usually fitted in pairs beneath Apex Door canopies. The majority are fitted beneath glassfibre canopies, but these brackets can also support traditional canopies made in timber with traditional tiled roofs.
Manufactured in a strong white Duropolymer material they feature a woodgrain effect which does not require decorating. Installers should ensure the 630mm leg is fitted back to the wall with the 580mm leg projecting away from the wall. Fix with 3 x screws or coach bolts (not supplied but widely available from builders merchants). Under no circumstances attempt to screw or drill through the bracket except where the pilot holes are clearly visible. Click for full fitting instructions.
Product Availability: Allow 2-3 days - can be bought individually if required, or in cartons of 10 units for volume users.
Note: Each GB03 is designed as a structural support. Correctly installed each item can support a 75 kg load. Supplied in RAL 9003 white. 10 Year Warranty. No need to decorate.
Important Information: Please install with 2 x 6" Zinc & Yellow No.10 Mushroom Headed Screws (or coach bolts) – using 2x 3" Brown Rawlplugs for a secure wall fixing. Fix the bracket to the canopy using 1 x 4" Zinc & Yellow No.10 Mushroom Headed Screw through the aperture towards the "nose" of the bracket.
|Price: £67.85 including VAT|
|Material: Strong Duropolymer® Profile with white RAL 9003 exterior grade automotive paint finish||Projection: 580mm|
|Warranty: 10 years (When installed in accordance with Manufacturer's guidelines - FDP700, FX200 to joints)||Height: 630mm|
|Standard Finish: White RAL 9003 exterior grade automotive paint finish||Width: 70mm|
|Downloads: GB03 Technical Drawing - Gallows Bracket Installation Instructions|