Orac Xterio Dentil TF06

TF06
TF06
TF06

TF06 dentils are usually installed at eaves level on executive homes built to mimic detailing from the Victorian era. Manufactured in a tough polyurethane material they are supplied in a pre-finished white.

These are usually installed with the 155mm section against the wall and the 175mm length projecting along the underside of the soffit. TF06 dentils can be spaced at 600mm centres, but are most frequently fitted in a "hit and miss" pattern. In effect this means most applications will require 16 dentils for every 5 metres of soffit. To achieve an architectural balance we recommend using the TF06 dentil on soffit sizes of around 250mm or more.

Each dentil should be fixed from above by two suitable screws (not supplied) prior to the roof being felt and battened. Retro-fitting on property refurbishments can be achieved, call us to discuss appropriate procedures.

Click for full fitting instructions.

Product Availability: Allow 2-3 days – can be bought individually if required, or in cartons of 25 units. We offer free samples to any NHBC House Builder.

Price: £35.60 including VAT
Material: Lightweight Polyurethane Profile with white RAL 9003 exterior grade automotive paint finish Projection: 175mm
Warranty: 10 years (When installed in accordance with Manufacturer's guidelines) Height: 155mm
Standard Finish: White RAL 9003 exterior grade automotive paint finish Width: 75mm
PDF downloads Downloads:  TF06 Technical Drawing  -  Dentil Installation Diagram (TF01)  -  Dentil Installation Diagram (TF02)

Orac Dentil Range

Orac TF01 Xterio Dentil
350 x 123 x 77mm
Orac TF02 Xterio Dentil
105 x 120 x 77mm
Orac TF03 Xterio Dentil
200 x 100 x 77mm
Orac TF04 Xterio Dentil
200 x 250 x 77mm
Orac TF05 Xterio Dentil
255 x 135 x 100mm
Orac TF06 Xterio Dentil
175 x 155 x 75mm
Orac RF01 Xterio Rafter Boot
113 x 65 x 48 mm